Seat

430mm deep front to back, upholstered 30mm 60kg CMHR foam cushion supported on a high density birch plywood base, underside finished with a 6mm capping and the whole seat fitted with a jacket cover in selected material.

Back

Nominally 300mm top to bottom, upholstered 35kg CMHR foam cushion supported on a high density birch plywood base, outside back finished with 6mm capping and the whole back fitted with a jacket cover in selected material or with outer plywood 3mm thick clear lacquered or painted to colour of choice.

Stanchions

Constructed from hollow section steel and plate and complete with sprung “auto-tip” seat brackets to BS5216 ND/3. All steelwork is finished in oven baked epoxy power coating to RAL 7016 anthracite grey

Arms (Optional)

250mm in Length with profiled side panels in 12mm plywood with plywood rib to form rigid construction. Top and sides covered with CMHR foam and the complete arm covered in selected material.

Material

Covering material to be selected from Bradbury Contract Fabrics Flamblend or Checkers ranges of FR Tweed

Numerals

Numerals are screwed to the underside of the seat bottom and have a white background with black type face. Nominally 40mm x 16mm

Row Letters

Letters are screwed to outside face of end panels and have black background with white type face. Nominally 70mm in Diameter