Commonly referred to as our multiplex chair this model has been in the range since the company started. Despite numerous the upgrades over the years including the introduction of cold cure moulded foam seat and back cushions this chair more than stands the test of time. Looking every bit as modern today as it ever did, it’s also the undisputed king of comfort.


470mm deep front to back. Constructed on pre-formed plywood base incorporating counter- balance for automatic tipping. Base fully upholstered in high resilient fire retardant foam 125mm deep foam to top to give maximum support and comfort and 8mm foam to the underside to provide aesthetic appeal. Complete upholstered base entirely enveloped in selected material, with “zip fastener” at the rear of the seat.


595mm deep top to bottom. Constructed on pre-formed plywood base. Upholstered ergonomically contoured 100mm deep high resilient fire retardant foam incorporating lumbar support. Face covered in selected material with upholstered panel at the rear. Back fitted with brackets for securing back to stanchions, the brackets being adjustable with two pre-set positions to provide selected sitting position.


Constructed of hollow section steel and flat bar, and complete with pivot action brackets including nylon bush and silencer buffer. All steelwork is finished in oven baked epoxy power coating to RAL 7016 anthracite grey


Constructed from particleboard side panels with plywood ribs to form a rigid construction. Top upholstered 25mm density fire retardant foam and the complete arm covered in selected material.


Covering material to be selected from Bradbury Contract Fabrics Flamblend or Checkers ranges of FR Tweed


Numerals are screwed to the underside of the seat bottom and have a white background with black type face. Nominally 40mm x 16mm

Row Letters

Letters are screwed to outside face of end panels and have black background with white type face. Nominally 70mm in Diameter