LT 5
LT 5 Lecture Chairs
LT 5 lecture chairs are fully upholstered with moulded foam thicker based chairs. Writing ledges are supplied with modesty panels on front rows. These lecture chairs come with uniform backs.
Auditoria Services have installed LT 5 lecture chairs in many locations across the UK including;
- Glasgow University
- Hull University, Science Building
- University of Cambridge, Mill Lane Campus
- Sheffield Hallam University, Peak Lecture Theatre
*All measurements are as standard but can be adjusted to suit your requirements.
Seat
440mm* front to back, 90mm* thick CMHR 50* foam supported on a 12mm* plywood base and covered in selected material. Underside finished with 3mm* thick upholstered outer plywood.
Back
400mm* top to bottom, 50mm* thick contoured CMHR 35F* foam supported on a 12mm* plywood base. 10mm* CMHR 27* capping and covered in selected material. Note: back height is adjusted to suit row rise.
Stanchions
Constructed from rectangular hollow section, flat plate and steel bar. Pivot action complete with nylon bush and silencer buffer. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.
Ledge
290mm* wide, manufactured from 18mm* MDF board with plastic laminate and high pressure matching or contrasting edges.
Modesty Panels
390mm* high, manufactured from 18mm* MDF board with plastic laminate and high pressure matching or contrasting edges.
Material
Covering material to be selected from standard range.
Options
Outside backs and under-seat bottoms can be supplied with 3mm* clear lacquer birch plywood panels as against fully upholstered at no additional cost. Full depth extended backs.
