How our systems operate
To best suit your needs, we offer a choice of three systems which can be used on our tiered seating systems;
When the system has been fully extended, once required ancillary parts have been installed such as aisle steps and aisles/gangways are clear, the chairs may then be lifted into position.
The chairs are arranged on a beam in banks of 2 and 3 or more dependent on chair model and system.
To lift the seating stand in the middle of the bank, facing the rear of the system, and lift the chairs by the back closest to the centre of each bank. When the chairs are fully lifted, ensure the locking mechanism has engaged.
To lower the seating, the locking mechanism must first be disengaged. To unlock each bank of chairs, locate the bracket on the chair release handle under the unlocking bar. Lightly push the back of the chairs and push the handle down. This should lift the unlocking bar and free the chairs. Rotate the chairs forward and gently lower them onto the deck. Ensure the decks are clean and free of debris.
Chairs in each row are linked together and have Gas dampers to assist enabling up to 14 chairs per row (dependant on chair model) to be raised together. All rows, with the exception of the rear row and any nose mounted rows lower automatically when the system closes.
Optional - Partial dust covers included to conceal the chair folding mechanism at decks.
All chairs with the exception of the first and top/rear tier chairs fold down automatically when the system closes and raise automatically when the system fully opens. Chairs on the first and top/rear tier operate as semi-auto.
Optional - Full dust covers included to conceal the chair folding mechanism at decks.